Solder

IPC J-STD-001 GS Certified IPC Specialist (CIS) Course

DESCRIPTION OF COURSE

COURSE OUTLINE

SCHEDULE

REGISTRATION

CONTACT US

IPC J-STD-001, Requirements for Soldered Electrical and Electronic Assemblies, has emerged as the preeminent authority for electronics assembly manufacturing worldwide. The standard describes materials, methods, and verification criteria for producing high-quality soldered leaded and lead-free interconnections. It emphasizes process control and establishes industry-consensus requirements for a broad range of electrical connections. The IPC J-STD-001 training program consists of both hand soldering as well as learning the material in the J-STD-001 specification related to various assembly methods.

The IPC J-STD-001 training program with the space addendum focuses on the knowledge and hand skills that individuals need to produce high-quality soldered interconnections. Certification helps enhance individual skills and performance. The IPC J-STD-001 Certified IPC Specialist (CIS) Course with the space addendum provides individuals with a portable credential that recognizes their soldering skills and understanding of this internationally recognized standard.

dctc-soldering
Buy the J-STD-001 spec Buy the J-STD-001 spec
COURSE OVERVIEW

Completion of the IPC J-STD-001 Certified IPC Specialist (CIS) Course with the Space Hardware addendum  leads to the issuance of an IPC certificate. The J-STD-001 certification course uses lecture, practical application, and written examinations to teach the standard criteria. The course consists of 5 modules plus the space addendum. Please view the modules under the course outline.

The IPC J-STD-001 certification program for CIS candidates consists of hand soldering skills of someone who would be considered at the advanced level in terms of their soldering skills. The students should also be well-versed in component identification as well be knowledgeable about EOS/ESD practices for the J-STD-001 certification program. Finally, the IPC J-STD-001 candidates should be at the 5th grade or better in terms of their reading comprehension level. Please note that previous soldering experience is recommended. This class includes the study of the Space Hardware addendum which provides additional requirements over those issued in J-STD-001. These additional requirements are included for those products that must survive the vibration and thermal cyclic environments of getting to and operating in space.

BEST Inc. instruction is different from most other training centers as we test on inspection skills as part of Module 5. Students are shown various PCBs, as well as terminals, and then are asked to identify defects.

COURSE OBJECTIVE

- Demonstrate lab soldering that meets the minimum requirements of the IPC J-STD-001 certification program requirements

- Be able to reference the IPC J-STD-001 standard

- Earn an overall score of 70% or better on the IPC written examinations in order for passage of the IPC J-STD-001 certification.

 

MATERIALS PROVIDED
  • IPC J-STD-001 specification
  • IPC certificate of completion
Course Outline

MODULE 1 - Introduction/Overview of IPC J-STD-001 (Required Prerequisite)

  • Course Overview/Safety
  • EOS/ESD/Equipment Classes
  • Solder Theory/Solderability
  • Solder Flux/Solder Alloys
  • Facility & Tools/Training Requirements
  • Plated Through-Hole & SMT Assembly/Solder Requirements
  • Cleaning/Review
  • Final Examination

MODULE 2 - Wires and Terminals (Optional)

  • Wire Preparation & Soldering to Terminals
  • Terminal Inspection
  • Wire/Terminal Demonstration and Lab
  • Review
  • Final Examination

MODULE 3 - Through-Hole Technology (Optional)

  • Lead Preparatio/Component Mounting
  • Plated Through-Hole Inspection Criteria
  • Through-Hole Demonstration and Lab
  • Review
  • Final Examination

MODULE 4 - Surface Mount Technology (SMT) (Optional)

  • SMT Criteria
  • SMT Inspection Criteria
  • SMT Soldering Demonstration and Lab
  • Review
  • Final Examination

MODULE 5 - Inspection Methodology (Optional)

  • Theory of Inspection SPC
  • Defect Definition & Disposition
  • Inspection Skills Lab
  • Review
  • Final Examination

MODULE 6 - Space Addendum 

  • Specific Space Criteria
  • Review
  • Final Examination
Components covered in the training:
Through-Hole SMT Terminals
- 1/4 Watt Resistor - 1206 MELF - Turret
- DO-35 Diode - 1206 Capacitor - Pierced
- CK06 Capacitor - 0805 Resistor - Hook
- T0 5 Transistor - 0402 Resistor - Bifurcated
- DIP-16 - SOIC 14 - Cup
- 22 AWG Wire - LQFP 100  
  - PLCC 20  
  - D-PAK  
Course Schedule

Click Here to register for a course. For the enrollment form in PDF format, click here.
Click Here to download the 2018 Training Schedule (January - June) in PDF format.
Click Here to download the 2018 Training Schedule (July - December) in PDF format.

All classes are available at our locations and on-site at your facility, or throughout the USA in our Mobile Training Center . Contact BEST at 847-797-9250 to register!

Locations

BEST Headquarters - Chicago, Illinois

Detroit, Michigan

Minneapolis, Minnesota

Cleveland, Ohio

Huntsville, Alabama


BEST Headquarters - Chicago, Illinois

- Certifications held at BEST in Rolling Meadows, Illinois, right outside of Chicago -


IPC INSTRUCTION (CIT) CERTIFICATION

IPC J-STD-001 Instructor Certification        IPC J-STD-001 GS Space App       IPC J-STD-001 Instructor Recertification
July 9 - 13                                                       July 13                                             July 19 - 20
September 17 - 21                                           September 21                                  September 13 - 14
November 5 - 9                                                November 9                                     November 15 - 16

IPC-A-610 Instructor Certification              IPC-A-610 Instructor Recertification
August 7 - 10                                                   July 17 - 18
October 2 - 5                                                    September 11 - 12   
December 4 - 7                                                 November 13 - 14                                             

IPC/WHMA-A-620 Instructor Certification    IPC/WHMA-A-620 Instructor Recertification      
July 23 - 26                                                       July 31 - August 1
September 24 - 27                                             October 23 - 24  
November 26 - 29                                              December 11 - 12

IPC 7711/21 Instructor Certification           IPC 7711/21 Instructor Recertification
August 13 - 17                                                   August 2 - 3
October 8 - 12                                                    October 25 - 26 
December 3 - 7                                                  December 13 - 14

IPC OPERATOR (CIS) CERTIFICATION

IPC J-STD-001 Operator Certification        IPC-A-600 Operator Certification      IPC-A-610 Operator Certification
August 20 - 24                                               August 22 - 24                                     August 27 - 29
October 29 - November 2                                October 10 - 12                                    December 17 - 19

 

IPC/WHMA-A-620 Operator Certification    IPC 7711 Operator Certification
August 6 - 8                                                     August 27 - 31
October 15 - 17                                                October 1 - 5

 

BEST CERTIFICATION

Soldering 101                  Wires/Terminals 101
September 5 - 6                 September 7
November 19 - 20               November 21
                           

SMT Rework                    Advanced SMT Rework         SMT Boot Camp
October 15 - 16                  October 17                             August 13 - 15

Mixed Tech. Rework        Lead-Free                  ESD Awareness
September 24 - 28             September 10              September 21         
November 26 - 30

                           
BGA Rework/Profiling     Cable/Wire Harness Assembly
February 21 - 23                August 9 - 10
May 30 - June 1                 October 18 - 19                 

 

Custom classes also available on dates that work with your schedule!
For more information, please call BEST at 847-797-9250
Course Registration

EMAIL TO aconley@solder.net OR FAX BACK TO BEST @ 847-797-9255

FOR PRICING AND ANY OTHER INFORMATION, PLEASE CALL BEST @ 847-797-9250