|
IPC/WHMA-A-620 CIS
TRAINING
DAY 1 through 3 (depending on the number modules chosen)
Module 1 – (required)
Introduction/IPC Professional Policies and Procedures (section 1); Foreword and Applicable Documents (section 2); Cable/wire preparation (section 3); Measuring Cable Assemblies (section 11); Testing Cable Assemblies (section 19)
Module 2 – (optional)
Crimp Terminations (section 5) and Insulation Displacement Connections (section 6)
Module 3 – (optional)
Soldered Terminations (section 4)
Module 4 – (optional)
Connectorization (section 9) and Molding/Potting (section10)
Module 5 – (optional)
Splices (section 8)
Module 6 – (optional)
Marking/Labeling (section 12); Wire Bundle Securing (section 14); Shielding (section 15); Protective Coverings (section 16)
Module 7 – (optional)
Coaxial and Twinaxial Cable Assemblies (section 13)
Module 8 – (optional)
Solderless Wire Wrap (section 18)
|
